Are you facing one of these three most commonly faced printer problems? Is it affecting your productivity? Thinking of replacing the printer with a new one? Don’t! Here are some expert advices coming from an experienced printer repair shop in Vancouver to help sort you issue!
Paper Jamming issues
A week without paper jam would be amazing. However, it is something unavoidable that keeps happening from time to time. So, how do you avoid such issue? Here are some tips to help you through this process:
- Always ensure to square off the pile of papers before inserting it in the tray
- Make sure that the pages are lined up in proper order
- Make sure that the guides are properly flush with papers
- Ensure that the tray is not over-filled
The printing has suddenly slowed down
Sometimes, it can get pretty irritating when the printer slows down. There could be several reasons for it. It could be that you are updating your software or the printer is kept far away from your router. However, one of the finest ways to speed up the process of printing is by printing it through the draft mode. The draft mode will help you save up on your ink and toner and speed up the printing process. This is a fantastic solution for casual printing solution that requires normal low quality printing.
Blotched and faded printing results
Have you ever faced this issue, that your printed documents felt like an article written in the 90s website. Faced it? Facing it? It happens sometimes? Well chances are that there is a problem with your printer cartridges. These products are quite costly, so, do not have them replaced instantly. Verify if the cartridge have dried up or not.
If so, “we suggest that you find two paper towels, one damp and the other wet. Take the dried up cartridge out and blot it on the damp towel a few time, with the side of the print head down. Once the print head has been blotted, keep hold of the cartridge against a dry paper towel for almost 30 seconds to a minute. This step would be enough to dispel the dried ink that is clogging the head. The process should be repeated once again and the cartridge should be sided back into the printer. Try a test print and you are good to go.
However, keep in mind that the paper towels only works with the integrated cartridge heads. It does not work with the ones that use cartridges that pop into a print head built into the printer.
Regardless, don’t forget that majority of the printers nowadays comes with the features that warn you beforehand, if there is any sort of problem with the print head. Regardless it is smart to regularly check the inside of the printer to find any jammed or broken parts. If all else fails, contact your local printer repair shop in Vancouver to help sort the things out for you.
If you have any queries, please free to contact us. We are happy to help you.
